>> Blue Red
home > Duplicator 12
Duplicator 12

1. Software for printer.

Cura 4.6 is latest Cura with adding Wanhao printers.

Cura 18.061 is older Cura with old interface. If you like old style, you can download this edition.

  Cura 18.061 download

 

Cura 4.7.1 and up is newest software which is too new to embed Wanhao printer. Therefore we need to add the D12 manually.

 Cura 4.7.1 download        Instruction on adding D12

 MKSPlugin042802       filament setting

 

2. Flashing Firmware for D12

D12/230    D12/300  D12/400     D12/500  

    Instructoin Video Guidance

    2.1 If you want to add BL touch onto your D12/230 or D12/300, please flash the following firmware.

 D12/230BL  D12/300BL   Instructoin Video Guidance

     Video guidance  Installation manual(hardware)

3. Simplify 3D configuration.

D12-230 FFF